Minerals
Minerals
1- BARITE is used to increase the density of drilling fluids
Typical Physical Properties| Sr. no. | Parameters | Specified value |
| 1 | Appearance | Brown-grey powder |
| 2 | Specific Gravity | 4.0 to 4.2 |
| 3 | Solubility | Insoluble in Water and Oil |
| 4 | Ph | 7.0-9.5 |
Packing
It is packaged in 40 Kg, 50 Kg HDPE Bag and 1.5 MT Jumbo Bag. For further information kindly contact us on info@....2-Calcium Carbonate is acid soluble grinded Calcium Carbonate, It is used as a weighing material and also as Bridging agent.
It is available in three sizes Coarse, Medium and Fine as follow:
| CaCO3 (Coarse) |
| CaCO3 (Medium) |
| CaCO3 (Fine) |
- CaCO3 (Coarse)
| Sr. no. | Parameters | Specified value |
| 1 | Physical State | Fine white free flowing Powder |
| 2 | Specific Gravity | 2.65 Min |
| 3 | CaCO3 Content | 96-98% |
| 4 | Moisture Content | Less than 2% |
| 5 | CaCO3 Coarse | Retention on 16 mesh sieve : 100 % |
- CaCO3 Medium
| Sr. no. | Parameters | Specified value |
| 1 | Physical State | Fine white free flowing Powder |
| 2 | Specific Gravity | 2.65 Min |
| 3 | Caco3 Content | 98% Min |
| 4 | Moisture Content | Less than 2% |
| 5 | CaCO3 Medium | Retention on 100 mesh sieve : 60 % |
- CaCO3 Fine
| Sr. no. | Parameters | Specified value |
| 1 | Physical State | Fine white free flowing Powder |
| 2 | Specific Gravity | 2.65 Min |
| 3 | Caco3 Content | 96-98% |
| 4 | Moisture Content | Less than 2% |
| 5 | CaCO3 Fine | Retention on 100 mesh sieve : 40 % |
Material is packed in 50 Kg HDPE bags/1.0 MT jumbo bags. Private Labeling and customized packaging is also available on request.
For further information on
CaCO3 kindly contact us on info@
3-BENTONITE Two grades are available OCMA DFCP – 4 Grade Bentonite Powder:
| PROPERTIES | PROTOCOL | UNIT | REQUIRED | RESULT |
| Yield | OCMA DFCP-4 | bbls/2000lbs | 90 min | 99 – 115 |
| A.P.I. Filterate Loss | OCMA DFCP-4 | ml | 15.0 max. | 14.2 – 14.8 |
| Moisture Content | OCMA DFCP-4 | % by weight | 15.0 max. | 10.0 - 12.0 |
| Dry Screen Analysis 100 Mesh Sieve | OCMA DFCP-4 | % by weight | 98.0 min. | 98.5 |
| Wet Screen Analysis 200 Mesh Sieve residue | OCMA DFCP-4 | % by weight | 2.5 max | 1.75 |
| Properties | Protocol | Unit | Result |
| Moisture Content | API Spec. 13A:2010/ ISO 13500: 1998 | % by wt. | 12.0 Max |
| Dry Screen Analysis (residue on 75 um sieve | API Spec. 13A:2010/ ISO 13500: 1998 | % by. Wt. | 15.0 max. |
| PH Value of 5% gel | IS:12446 - 2007 | pH | 9.5 - 10.0 |
| Loose Bulk Density | IS:12446 – 2007 | gm/ml | 0.85 – 1.0 |
| Filterate Volume | API Spec. 13A:2010/ ISO 13500: 1998 | ml | 18 max |
| Viscosty at 600 rpm | API Spec. 13A:2010/ ISO 13500: 1998 | 60 – 80 | |
| Methylene Blue Value | IS:12446 - 2007/ ISO 10416:2002 | mg/gm of clay | 350 - 400 |